Skip to content

Sunroom 6 ft. x 10 ft. Solarium Kit - White Structure & Hybrid Panels

Preview in 3D

Preview in AR

Scan QR code for AR preview on your device
Requires compatible Apple iOS 13 or Android with ARCore 1.9+
Structure color
Glazing
Product Series Name

Increase the amount of time you can enjoy the outdoors in a safe setting with our diy sunroom kits with its easy installation. The classic, clean lines along with its year-long usability make it a natural supplement to your home, adding light and elegance that will easily blend with any home design, augmenting its beauty and value. It is the perfect environments to sit back kick off your shoes and enjoy your time off. Use it as an indoor Jacuzzi, for entertaining or alternately use it as a hobby greenhouse during winter season. The combination of the 2 glazing types allows a very pleasant atmosphere and generates a comfortable lounging environment; twin-wall Polycarbonate roof panels and UV immune Acrylic wall panels. The robust resin frame with its additional Aluminum profiles allows the use of sliding technique for easier assembly. Our home adjoining sunroom addition is built for a long and lasting use.

  • Resilient, transparent acrylic clear as glass side panels, immune to UV rays, retain 90% light transmission and clarity
  • Virtually unbreakable, twin-wall polycarbonate roof panels, filter the sunlight and block up to 100% of the harmful UV rays
  • Thick resin frame improves insulation and creates extra durability for years to come
  • 100% UV protected
  • Hinged, wide side door and roof vent provide air circulation on warmer days
  • Central profiles are reinforced with galvanized steel rods – for stronger construction
  • Easy DIY installation – sliding panels’ assembly system
  • Maintenance free
  • Technical information, including dimensions, panel thickness, and wind and snow load, can be found in the photo gallery above.
Model: #702485

Dimensions

A Length 324cm 10'8"ft
B Width 200.5cm 6'7"ft
C Height 247cm 8'1"ft
D Door Width 58cm 1'11"ft
E Door Height 185.5cm 6'1"ft

Product Details

Accessories Screen Door Kit White

Enclosed Gazebo Accessories

Check out our certified Canopia accessories

Frame

Thick Resin frame improves insulation and provides extra durability Central profiles are reinforced with galvanized steel rods for stronger construction Additional Aluminum profiles allows the use of sliding technique for easier assembly  

Door assembly

Hinged, wide (73.2/31.5 in) side door can be assembled on either of the two sides

Rating and Reviews

4.67 (0 Reviews)
Rating Breakdown
0
0
0
0
0
Post a review
Customer Reviews (0)

There are no reviews yet.

FAQ

It is necessary to have it anchored as per the instructions, Anchoring this product to the ground is essential to its stability and rigidity. It is required to complete this stage in order for your warranty to be valid.
Yes, you can definitely use a heater inside the closed gazebo. Make sure you follow the manufacturer’s safety instructions. Using a heater will allow retention of heat, a suitable heater by Canopia can be found online.
Yes, the Sun Room’s door can be placed on either side. There are no available screens for the Sun Room. The door swings outward.
No, it is not an option, it cannot be performed.
Yes, it can be anchored to concrete. Base or foundation must be flattened, leveled and prepped prior to installing the product. The product must be built on a solid level surface in order to perform properly. We recommend using concrete or wood deck as base. In addition, It is imperative that the ground surface be perfectly flat and leveled and in a 90° angle to the supporting wall.
The structure can support a ceiling fan hanging from it, it can be installed using the beam’s built-in tracks. Please make sure you install the fan and the wiring in a secure way, you may consult with a handyman as to how to attach it to the top.
I am assuming you are referring to a stationary RV. If this is the case, you need to make sure the RV’s size is suitable to the requirements. You will need to find the compatible screws and plugs in order to attach the SanRemo to the RV. In addition the SanRemo requires a solid foundation such as concrete, asphalt etc. and the back is supposed to be attached to a structure wall (such as a house’s wall). Should you attach it to a vehicle; the lower part (where the wheels are) will remain open.
The SanRemo can be installed on a deck and attached to a house with vinyl sidings. Please consult with an expert / constructor with regards to the screws and plugs you should use for your specific wall type and trex deck.
There are screen doors that can be added (to be purchased separately) and these can be installed without removing the existing doors.
Yes, the polycarbonate panels are high impact resistant and withstand hail.

Assembly instructions & Certificates for Downloads

Foundation

A
Prepare the site

The product must be built on a solid anleveled surface in order to perform properly.

1 - Clear the site
 
2 - Level the ground
 
 
Important We recommend checking for restrictions or covenants for building this product in your area. In addition we advise to check if you need to submit any forms or if any permit is required prior to building the product.

Customers who viewed this also viewed

Previous
Next
Need help making a purchase decision?
Fill out the form below and we will help!